( 1 ）将分流阀的“P”口与泵的出油口用软管连接起来。
( 2 ）将分流阀的“A”口与操纵阀的进油口用软管连接起来。
( 3 ）将分流阀的“H”口接通于液压锤进油管路上。
( 4 ）将分流阀的“T”口与油箱连接起来。
( 5 ）将液压锤的回油管连接在挖掘机的主回油管路上。
( 6 ）连接各接口的管路通径为：当主机供油量小于70L/min 时，管路通径为￠16mm；当主机供油量大于或等于70L/ min 时，管路通径为￠20mm。
Troubleshooting Two Faults on the WL60 Excavator
下一篇Troubleshooting the "Seizing" Fault Between the Pump Plunger and Cylinder Block of an Excavator
2024-09-29 13335 0
2024-09-20 13336 0
2024-09-20 13180 0
2024-09-19 12457 0
Lize City Air Terminal Underground Main Structure Nearing Completion: Maximum Transfer Walk Under 4 Minutes After Operation
Anti-seepage Curtain for Main Lock Pit of CSCEC Port Shenqiu Double-Line Lock Project Completed on Schedule
All Pile Foundations Completed on Quanzhou Baiqi Channel
Hainan Upgrades Housing and Municipal Infrastructure
First Foundation Concrete Pour Successfully Completed for Zambia Kafue West–Muzuma 330kV Transmission Line EPC Project
Hot News
评论 （0）