Excavator-Mounted Rock Drill Manufacturer   Excavator-Mounted Rock Drill Price   Excavator-Mounted Rock Drill Pictures   Excavator-Mounted Rock Drill Parameters   Factory Direct Supply of Excavator-Mounted Rock Drills   Hot-Selling Excavator-Mounted Rock Drill Manufacturer ​​​​​​

I. Overview of the Excavator-Mounted Rock Drill

Advantages: The original machine's performance is not altered, enabling interchangeability between the excavator modification and the drilling rig; it can be restored to an excavator in 30 minutes, and efficiency is more than ten times higher than traditional manual pneumatic picks.

Simple operation: The control panel is placed inside the excavator cab; the excavator operator can operate it after simple training, with no need for professional personnel.
                 

Fast speed: A hydraulic rock drill is used to fully improve drilling efficiency. On rock with a hardness of 5.6 degrees, the drilling speed can reach 2-3 meters per minute, 8-10 times that of pneumatic equipment.
                 

Flexibility: The excavator-mounted drilling rig fully combines the advantages of the excavator's convenient mobility and the drilling rig's drilling speed, making it suitable for drilling operations under complex working conditions.
                 

Low cost: The drilling rig of the excavator-mounted drill does not affect the excavator's own functions, and because the excavator's climbing performance and drilling angle adjustment are superior to those of a rock drilling jumbo, it is more flexible. Its price is only 1/10 that of a hydraulic rock drilling jumbo, or even lower than that of a pneumatic rock drilling jumbo.

Suitable for rock below grade 7——shale, sandstone, mudstone, broken strata, backfill layers, concrete, etc.
II. Parameters of the Excavator-Mounted Rock Drill

Drilling diameter: Ф42mm—Ф80mm
                

Drilling depth: 3 meters per pass / 6 meters per pass
                

Convertible models: 3 meters per pass   models above 8 tons
                                

6 meters per pass   models above 13 tons
                

Drilling time: Shale   hole diameter Φ80   depth about 3 meters     40 seconds/hole (sandstone drill bit)
                              

Sandstone   hole diameter Φ80   depth about 3 meters     1 minute 30 seconds/hole (sandstone drill bit)

III. Contact Information for the Excavator-Mounted Rock Drill

Contact: Wang Li

WeChat: 13287223671

Tel: 0537-2670858 Mobile: 13287223671 QQ: 2881248854